at mlogo
at inbn
What We Do
We are committed to provide sophisticated testing services with cutting edge technologies:

Environmental Reliability Laboratory
  • Anttela offers third party testing that helps to fulfil legal requirements and industry standards.
  • Anttela Environmental Reliability Laboratory is equipped with a variety of environmental test equipment, which are suitable for HDD, PCB, electronic and electrical product and components.
  • Anttela can perform many simulated environmental tests, such as High Temperature and Low Temperature Tests, Thermal shock Test, Steady Damp Heat, Cyclic Damp Heat, Gas corrosion Test, HAST etc according to GB, MIL and IEC standard methods.
  • Meanwhile, we provide inspection and analysis for the material or products before and after reliability test by means of many advanced surface analysis equipment. We also render the services of Failure Analysis and Consulting.

Failure Analysis Laboratory
  • Failure Analysis plays a key role in improving products quality by determining the root cause of parts or assembly failure.
  • Failure analysis plays a key role in improving products quality by determining the root cause of parts/assembly failure and working out the means for correcting and preventing current/future problems.
  • Using advanced equipment, material characterization techniques, our testing professionals render rapid, reliable, cost-effective technical services for parts/assembly failures.

EMC/EMI Laboratory
  • We help to ensure that your product is compliant with industry specific EMC standards for legislative, national and international approvals.
  • EMC/EMI testing done at Compliance Engineering Pty Ltd.
Product Certification
  • Our Certification services cover everything from product safety to wireless certifications to electromagnetic compability to functionality.

Reballing/PCBA Rework
  • Solder mask repair PCB cut trace PCB pin trimming IC salvaging, connector pin prepping lead trim and form Re-Tapping and etc.

List of Available Tests
  • Temperature Humidity Test
  • Temperature Cyclic Test
  • Thermal Shock Test
  • Thermal Vibration Test
  • Mechanical Shock Test
  • Altitude Test
  • Vibration Test
  • Autoclave
  • Push-Pull Test
  • Packaging Test (ISTA)
  • EMC/EMI Testing
  • IP-Test
  • Burn In Test
  • Fast Ramp Rate Test
  • X-Ray
  • SEM/EDX
  • Decap Analysis
  • Dye & Pry Analysis
  • Grain Structure Analysis
  • Solderball Analysis
  • Cross Section
  • Measurement Analysis
  • Visual Inspection
Anttela Sdn Bhd (707011-K)
No. 104, Jalan Waja Indah 3,
Taman Waja Indah,
Kawasan Perindustrian Waja,
09000 Kulim, Kedah, Malaysia.
+604-408 0550
asb@anttela.com (Customer Service)

+6016-449 6561 (Dr. Sathiskumari)
+6016-449 6642 (Mr. Gobalan)
+6016-449 6560 (Mr. Danial)
sathis@anttela.com
      (Failure Analysis,ESD, Reliability &
       Business Development)
gobalan@anttela.com (Reliability/EMC/EMI)
danial@anttela.com (Failure Analysis)

Located at the centre of the Northern Region in Kulim, Kedah Darul Aman, Anttela Laboratory is very close to the North-South and East-West Highways. It is 27 km from the North Butterworth Container Terminal and 45 km from Bayan Lepas International Airport. It is directly linked to the East-West Highway via a four-lane primary access road.